3-4-2018 YOU CAN DOWNLOAD TANGO PRICE LIST BY
Tango Software v1.113 released
Update 1.108 of Tango programmer introduces brand new functionallity for work with Toyota/Lexus vehicles equiped with SmartKey Systems via OBD. The framework is implemented in Tango Toyota+ software. Main objective of the software is to allow addition of Smart keys in “all keys lost” situation by creating emulator which allows to get permission to register new keys via diagnostic equipment.System requirements:
- Tango programmer
- J2534 PassThru compliant OBD cable
- SLK emulator corresponding to system type
- Toyota maker software activation
- SLK-0x software activation
- Toyota TIS Techstream
- Windows XP/7/8/10 PC/Laptop
You can read more about the software here *
Unline Tango main software, updates of TangoPlus Toyota are manual. Download link, description and list of compatible OBD cables can be found in FAQ section of Forum Tango
*If you can’t see the contents of the CHM file, extract the archive, select tangoplusv6.chm Right Click->Properties->Unblock
Emulator SLK-01 – Supports work with DST40 smartkeys [Page1 94,D4]. SLK-01 supports emulation/clonning – functionallity of the emulator is part of Tango base software.
Emulator SLK-02 – Supports work with DST80 smartkeys [Page1 98]. SLK-02 supports emulation/clonning – functionallity of the emulator requires activation of SLK-02 additional software.
Emulator SLK-03 – Supports work with DSTAES smartkeys [Page1 88, A8]. SLK-03 supports emulation/clonning/image generation – functionallity of the emulator requires activation of SLK-03 additional software.
Emulator SLK-04 – Supports work with DSTAES smartkeys [Page1 A9]. SLK-04 supports emulation/clonning/image generation – functionallity of the emulator requires activation of SLK-04 additional software.
Quick Referrence Table :
Tactrix Openport 2.0
The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.
We include a USB cable with each OpenPort, which is all the hardware you’ll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you’ll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you’re working on an early non USDM STi in which case you made need one of our WRX adapters. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Mitsubishi, you’ll need the adapter for most pre CAN vehicles which include the 5-9 Evo. Choose the adapter you need from the ‘Reflash Adapters’ drop down list on the right side of this page.
- 72Mhz 32-bit processor
- USB 2.0 full speed device (USB-A/Mini cable included)
- Field upgradeable software
- Supports these major OBD protocols:
- CAN 2.0 (CAN/ISO15765)
- K-line (ISO9141/ISO14230(KWP2000)/dual K line)
- J2534 PassThru support with Windows DLL
- Standalone datalogs to microSD / microSDHC card without a laptop
- Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
- Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
- RGB status LEDs
*** Unlike Tango main software, updates of TangoPlus Toyota are manual. Download link, description and list of compatible OBD cables can be found in FAQ section of Forum Tango http://forum.scorpio-lk.com/viewtopic.php?f=13&t=21897
The device is intended for programming of transponders, that are a part of automobile immobilizing systems.
Unlike the previous model the Gambit, new model Tango is the two-band device that has allowed to add the list supported transponders with firm Texas Instruments products (Tiris ©).
The list of supported for the present moment transponders.
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945AC (VAG 2010-) IDE, eeprom reading
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7953 IDE, eeprom reading
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936 … PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase
Temic 11 reading , writing to T5, TK5551
Temic 12 reading , writing to T5, TK5551
Temic 8C reading
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN,
full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (DST+) reading
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.
The device has ergonomic design with high mechanical characteristics of IP65 class according to the DIN EN 60529 standard. The device has following dimensions:
length 160 mm
width 80 mm
height 50 / 30 mm
The device enclosure is made of 3mm ABS-plastics with a rubber shock-proof damping seal which simultaneously is a decor element. The seal also prevents the device sliding on a work table surface.
Also as well as the Gambit, the device derives the power from USB and does not demand connection of an external power source. Difference is use of drivers of other type that allows to avoid conflicts to other devices working through virtual ports.
Unlike the Gambit, the device has wide slot for keys of any size and two small holes of various depth for transponders of any sizes.
LED indication unlike Gambit is taken out on the upper cover of the case that is solution more convenient in using.
The program interface has the modern intuitive design favorably differing from the interface of Gambit.
Meeting modern requirements, Tango supports OS Vista that was not realized in Gambit. Supported versions of Windows:
Programmer for transponders. Has an out-of-date one-band design, mismatches modern technical requirements. To familiarize with the description it is possible on the same web site.
Programmer for transponders. The two-band model following after Gambit, answers modern technical requirements.
The maker (key maker)
The mathematical apparatus built in the program allowing automatically to create keys for cars. Usually, the maker uses the memory content (dump) of an immobilizer in the form of a file with .BIN extension. Does not require technical knowledge of the operator.